Quality,Technology, People, Society
Injection molding products

Types of injection molding products

Double-shot molding: is a two-step process in which either the color or the material is
  injected first.Upon the hardening of the material, a second color or material is injected
  into or around the first shape.
Injection blow molding: is the process in which
  plastic is injected into a mold to form a plastic tube.
  The tube is then blown into a cavity mold to form a
  hollow part.
Plastic insert molding: is an injection molding
  process in which plastic gets injected into a cavity
  surrounding an insert piece just prior to molding.
Plastic insert molding results in a single piece encapsulated by the plastic.
Push-pull molding:is a process that involves multiple layers with different orientations
  , providing more uniform properties to the parts than if they were molded from a
  single direction.
Gas-assisted injection molding: is a process in which inert gas, such as nitrogen, is
  forced into the melt while it is entering the mold, packing the plastic into the cavities.
  Gas-assisted injection molding reduces cycle time, part weight, warpage and stress to
  the cooled parts, as well as minimizing other problems.
   
Do you want to know more about injection molding?
 
Products display:  
     
 
 
 
WS-IM01
  
WS-IM02
       
      Next
Injection Molding
Thermoforming
Rotational molding
 
 

 
Wild Speed Rubber
Wild Speed Tie Down
Wild Speed Casting
Wild Speed Hardware
 
 

 

 

 

 

 

 

 

 

Tel:+86 571 86622635
Fax:+86 571 86622035
Add: RM.2-4-2401 Solar
International Building, No.
730 Weiye Road, Binjiang
District, Hangzhou 310053
China.

Mail:info@wildspeed.com.cn
Copyright © 2005 Wild Speed Industrial Corpration. All rights reserved.